Quick Installation Guide for MPC-ETN
THOMSON TECHNOLOGY
●
9087A – 198
th
STREET, LANGLEY, BC CANADA V1M 3B1
TELEPHONE: (604) 888-3381
●
EMAIL: [email protected]
●
www.thomsontechnology.com
PM086 REV 1 08/08/28
The Thomson Technology MPC-ETN is a multi-protocol converter and Serial –Ethernet media converter. This Quick
Installation Guide will describe the method to interface a PC to either a MEC 20 or TSC 800 controller over an
RS485/232 serial interface.
Check Components:
Unpack and ensure that all components are in good condition.
Qty
Description
1
MPC-ETN protocol converter
2
RJ45 to DB9M Converter
1
RJ45 to DB9F Converter
1
6ft Ethernet Cable (CAT5)
1
10ft Ethernet Cable (CAT5)
1
Software & Documentation CD-ROM
Gateway Utility Software – Download the latest from www.thomsontechnology.com
Customer Required Components:
Qt
y
Description
1
Ethernet Cable
1
24VDC power supply (min 12Vdc, max
30Vdc), 100mA max.
NOTES:
1. Your IT SUPPORT GROUP must assign a ‘Static IP Address’ to the MPC-ETN. The ‘Static IP Address’ is
required so that the MPC-ETN device will work correctly on your Ethernet Network.
2. Modscan32 software is needed for Check/Verification of the MPC-ETN setup. Download Modscan32 from the
following link - http://www.win-tech.com/html/demos.htm - ModScan32.zip (851K) . Follow the Setup Wizard
for the installation of the Modscan32 Software.
