THOMSON grass valley XtenDD, Руководство пользователя

Страница: 161 / 250

6. Installing System Accessories
6 - 23 Planning and Installation - Rev. 0 / 04.2002
6.2.4 OPERATION
Pressing a delegation button delegates the AUX-CP to that function. The delega-
tion button is lit to indicate that status. If possible, the source buttons show the cur-
rent status of the delegated function. In most cases, this will be the selected cross-
point on the delegated bus. If the function is TiME Memo recall or Make Memo
recall, no state is indicated because such recalls are events.
Pressing a delegation button that is programmed to be 2
nd
or 3
rd
toggles the shift
level of the source buttons.
2nd 3rd Source buttons
CP-300
Source buttons
CP-330
Source buttons
CP-3020
off off 1 .. 24 1 .. 48 1 .. 20 (+ 20 per CP 3021)
on off 25 .. 48 25 .. 62 21 .. 40 (+ 20 per CP 3021)
off on 49 .. 72 49 .. 96 41 .. 60 (+ 20 per CP 3021)
on on not allowed
Pressing a source button performs the function according to the delegation. I.e.,
selects the crosspoint or recalls the register or macro.
The response to a recall is a short flash of the source button.
The response to a crosspoint selection is the indication of the new crosspoint.
In menu Remote , the AUX-CPs can be enabled or disabled. In disabled state, the
AUX-CP performs no function. Local delegation is still possible.
Delegation
2
nd
, 3
rd
Source Buttons
AUX-CP Enable