manualshive.com logo in svg

THOMSON Amethyst III, Руководство пользователя, Страница: 64 / 306

Поделиться
Скачать
THOMSON Amethyst III Скачать руководство пользователя страница 64

Chapter 3 ’Web Browser Interface’ — GUI Overview 

64

Amethyst III DTV Smart Switch 

User Manual

Configuration Panel

The 

Configuration

 panel gives access to the following tabs: 

The 

Switches

 tab is mainly used to display the current state of the 

switches and to perform manual switching.

The 

Outputs

 tab is used to define what content should be sent to 

monitoring outputs, and to perform a switch operation on Amethyst III 
with IP interfaces.

The 

Tests

 tab provides a global overview of the quality of service of a 

selected input. Alarms are sorted by TR 101 290 level and advanced 
level.

The 

Automation

 tab is used to define the activation time of 

configurations stored in the Amethyst III memory.

The 

Statistics

 tab displays several types of chart (i.e. pie chart, line 

chart, stacking area chart, bar chart) that show the input streams 
content and the associated bit rates.

The 

Ethernet, FEC

 tab provides statistics on an Ethernet or IP input 

with FEC, if you have the FEC option.

The configuration tabs are used to edit one or more configurations. 
Each tab carries the name that you defined for the configuration.

They are all described later in this section with detailed information on 
commands found in the different GUI panels.

Configuration Tabs

Purpose

The 

Configuration

 tabs are used to edit one or more configurations. 

Once edited, the configurations are sent to the equipment for storage or 
application.

Description

Configurations are listed in tabs. 

Figure 3-3.  List of configurations

Содержание Amethyst III



















































































































































































































































































































Отзывы:

Нет отзывов