THOMSON Amethyst III, Руководство пользователя, Страница: 123 / 306

Chapter 3 ’Web Browser Interface’ — Interface Description
Amethyst III DTV Smart Switch 123
User Manual
The Switches view displays the items present in the active configuration,
of the following types:
 Inputs: ASI or IP inputs items (orange items)

Switches (green items)
 Outputs (purple items)
This view is used to edit or modify the configurations.
ASI Input Items
Figure 3-74. ASI Input dialog box
The following parameters shall be set:
Parameters Area
 Name : enter a name for the input, at your convenience. This name is
used in the Switches tab for a better readability.
 Input : select an input from the drop-down list.
 T2-MI Stream : if the input stream is a T2-MI stream, check this box and
indicate the PID that carries the T2-MI stream in the T2-MI PID field.
Tests Area
 Associated group of tests : select the group of tests to carry out. These
groups of test can be configured from the Tests tab (refer to the
Section ’Tests Tab’ on page 174 for more information).

If the stream is a T2-MI stream, add at least the T2-MI presence test. It
is also recommended to add the T2-MI PID continuity counter and
T2-MI Packet count error tests as these kind of errors may reset the
following modulator.