The ROC 4306 is a universal remote control (4 in 1). It can replace 4 remote controls thanks to its
4 mode keys TV, VCR/DVD... It is compatible with the majority of television sets, video cassette
recorders, DVD players, satellite and cable receivers as well as terrestrial digital television (DVBT),
amplifiers and other audio equipment provided they are controlled by infra red signals.
This remote control has been factory programmed to allow you to use it immediately with the
majority of Thomson Group devices.We therefore advise you to try it before beginning to program it.
If programming is necessary, follow one of the methods A, B, C, D or E that are given in this manual.
But first, install 2 batteries (AAA) in the remote control.
Keep these instructions and the separate list of codes in a safe place so that you can later reprogram
your remote control.
1
Indicatorlamp:theredindicatorlamplightsupwhen
anykeyispressed.
2
B
:On/Standby.
3
Remotecontrolmode
SelectsdevicetocontrolTV,DVD,VCR,...
4
B
(
Play
):play*.
5
F
(
FF
):fastforward*.
6
L
(
STOP
):stopplayback*.
7
K
(
Pause
):stopsonanimage*.
8
I
(
EXIT
):teletextOffinTVmode.
SHIFT
and
EXIT
:turnsoffthemenuofthe
selectedproduct.
9
VOL-
/
VOL+
increases(
+
)ordecreases(
-
)the
volumeoftheTVset.
SHIFT
and
VOL-
/
VOL+
alsoallowsyouto
navigatethemenushorizontally.
10
S
:programmestheremotecontrol.
SHIFT
:activatesthesecondarykeyfeatures
(indicationsinblue).
11
Number keys 0 to 9:
thesekeyshavethesame
functionsasthoseofyouroriginalremoteandare
alsousedtoenterthecodesfordifferentproducts.
12
Pressthiskeyfirstbeforeyoutypeinthe2-digit
channelnumber(exceptforThomsongroup
products).
13
AV
:forselectinganexternalsource(SCART).
14
c
:switchestheTVsoundoff.
SHIFT
and
OK
:confirmsaselection.
15
PROG+
,
PROG-
:programmeszappingbutton
(receivedbythetelevisionsetorthesatellite
receiver);usetoscrollverticallythroughmenus
SHIFT
and
PROG+
/
PROG-
alsoallowyouto
navigatethemenusvertically.
16
a
(
MENU
):teletextOn/OffinTVmode.
SHIFT
and
MENU
:turnsonthemenuofthe
selectedproducts.
17
M
(
RECORD
):torecord.
18
G
(
REW
):goesbackwardoradvancesforward*.
*Thecolouredbuttonscanbeusedtoselectcategories
whenteletextisactivated,andspecificfunctions
dependingonthemake.
2 - Testing the remote control
before programming
1. Turnonthedevicethatyouwishtocontrol.
2. Pressthekeycorresponding(
3
)tothetypeofdevice
tocontrol:
TV
:televisionset,
VCR/DVD
:videocassetterecorder,DVDplayer,
DVB-T
:DVBTreceiver,
SAT
:satellite.
3. Pointtheremotecontrolatthedeviceyouwishto
controlandtrytoturnitoffusingthe
B
(
2
)key.
Ifthedevicedoesnotturnoff,youmustprogramthe
remotecontrolusingoneofthemethods
A
,
B
,
C
or
D
asdescribedbelow.
1 - Description of keys
3 - Programming
the remote control
Before you start programming, you must find the
subcode
of
the set to be controlled.
Refer to the list provided with these instructions, page I of the
codes
.
1 Switchonthesetyouwanttocontrol.
2. Holddownthe
S
(
10
)keyuntilthe
red indicator
lamp
(
1
) remains lit (the indicator light remains on
forafewsecondstogiveyouthetimetoproceedwith
the following steps.The indicator lamp flashes when
thistimeisalmostup,andthengoesoff).
3. Press the key (
3
) that corresponds to the type of
equipmentyouwanttocontrol:
TV
:televisionset,
VCR/DVD
:videocassetterecorder,DVDplayer,
DVB-T
:DVBTreceiver,
SAT
:satellite.
4. Whiletheindicatorislit,typeinthesubcode(example:
1forThomson).
5. Directtheremotecontroltowardsthesetandtryto
switchitoffbypressingthe
B
(
2
)key.
6. If the set you want to control switches off, press
c
(
14
)tomemorisethesubcode.
7. If the product doesn’t turn off, press the
B
(
2
) key
repeatedlyuntilthesetswitchesoff.Waitapproximately
one second between key presses to give the
red
indicator lamp
(
1
) enough time to go off and
lightupagain.Thiswillallowyoutoseewhetherthe
productrespondsornot.
8. Immediately upon the switching-off of the set to be
controlled,press
c
(
14
)tostorethesubcode.
Note:
If you want to assign another type of product than those
mentioned on the remote control (with the exception of the
TV
button which can only be used to control a television set),
begin by entering the code that corresponds to the product you
want to programme (a 4-digit code that you will find in the code
booklet – see method
B
).
Example: if you want to control a satellite receiver with the
VCR/DVD
key, begin by entering a satellite code (any satellite,
for example: 0603 for a Thomson satellite receiver) then begin
the procedure.
Check of the programming:
In principle, your set is ready for receiving the remote control
commands. Check your remote control for proper functioning by
performing the test described on page 3.
Method A – Fast programming with
1-digit subcode
GB
01_ROC4306_GB.indd 1
8/12/06 9:50:20
