Thomas SAF-T-LINER C2, Руководство по обслуживанию

Страница: 124 / 176

Torque Check with 47 Inch (119 cm) Torque Wrench and Tool DDC DSNCHA018005
Angle View
Extension Angle
(degrees)
Target Torque
[lbf·ft (N·m)]
Tool Setting
[lbf·ft (N·m)]
f422613 11/28/2016
0°
0
350 (475)
296 (401)
f422614 11/28/2016
45°
45 310 (420)
f422668 11/06/2018
60°
60 320 (434)
f422615 11/28/2016
90°
90 350 (475)
f422669 11/06/2018
120°
120 386 (523)
f422616 11/28/2016
135°
135 402 (545)
Table 1, Torque Check with 47 Inch (119 cm) Torque Wrench and Tool DDC DSNCHA018005
5. Install the wheel assemblies. For instructions,
see
Group 40 of the Saf-T-Liner C2 School Bus
Workshop Manual .
6. Remove the jack stands and lower the vehicle.
Radial Mounted Brakes
Bendix Calipers
1. Park the vehicle on a level surface, shut down
the engine, and set the parking brake. Chock the
tires.
2. Raise the vehicle and support it on jack stands.
3. Remove all of the wheel assemblies. For instruc-
tions, see
Group 40 of the Saf-T-Liner C2
School Bus Workshop Manual .
4. Set a torque wrench to 200 lbf·ft (271 N·m) and
tighten the caliper mounting bolts following the
tightening pattern shown in
Fig. 12 . If they do
not turn, no further work is needed. If they turn,
take the vehicle to an authorized Freightliner
dealer to have all of the caliper bolts on that
wheel end replaced.
Brakes
42
Saf-T-Liner C2 School Bus Maintenance Manual, November 2020
42/14