thomann Tour Guide TG 16 HAT, Руководство пользователя, Страница: 38 / 56

The display at the side of the device indicates the channel that is currently set. To change the
setting, press the button underneath the display until the decimal point on the display flashes.
If you briefly press the button now, you can change the channel number by one each time. The
channel numbers are represented by the characters „0“ … „9“, „A“ … „F“. If you do not press
the button for about six seconds, the device works with the current settings. Transmitter and
receiver must be set to the same channel.
Press [POWER] until the control LED turns off. The unit is turned off.
6.4 Charger system TG C2
Connect the supplied power adapter with the power supply input of the unit. Then connect
the power adapter to a power outlet.
Turn off the Bodypack Transmitter or Receiver that needs charging. Position the charging con‐
tacts of the Bodypack unit over the charging contacts of the charging slot. Insert the Bodypack
unit into the charging slot so that it clicks into place. The control LED of the charging slot turns
off. It lights up again when the device is fully charged.
Select channel
Turning the unit off
Preparing the unit
Charging Bodypack units
Operating
tour guide system
38