thomann Tour Guide TG 16 HAT, Руководство пользователя, Страница: 36 / 56

Press [POWER] until the control LED turns off. The unit is turned off.
6.2 Handheld transmitter TG 16 HT
Unscrew the bottom housing section of the hand-held microphone. Insert the batteries. Pay
attention to the correct location of the poles. The correct arrangement of the batteries is indi‐
cated with symbols in the battery compartment. Remount the lower part of the housing.
Press [POWER / MUTE] until the control LED and the display light up. The device is now opera‐
tional. The display is turned off automatically after a few seconds.
The display on the front side of the device indicates the channel currently set after turning on
the device. To change the setting, unscrew the lower part of the housing. Press [SET] (button
next to the battery compartment) until the decimal point on the display flashes. If you briefly
press the button now, you can change the channel number by one each time. The channel
numbers are represented by the characters „0“ … „9“, „A“ … „F“. If you do not press the button
for about six seconds, the device works with the current settings. Transmitter and receiver
must be set to the same channel.
Turning the unit off
Inserting batteries into the
receiver
Turning the unit on
Select channel
Operating
tour guide system
36