thomann STARVILLE MH-110, Руководство пользователя

Страница: 36 / 52

Press [MENU] , then [UP] or [DOWN] until the display shows ‘Fixture Temp’ . Press [ENTER] . The
display alternately shows the temperature of the LEDs ( ‘LED Temp’ ) and the temperature of the
electronics inside the unit ( ‘Main PCB)’ .
To close the temperature display, press [ENTER] or wait for 5 seconds.
Press [MENU] , then [UP] or [DOWN] until the display shows ‘Auto Test’ . Press [ENTER] . The device
now performs a selftest.
To close the selftest, press
[ENTER] or wait for 5 seconds.
Press [MENU] , then [UP] or [DOWN] until the display shows ‘Firmware Version’ . Press [ENTER] .
The software version of the device will now appear on the display.
To close the software version display, press
[ENTER] or wait for 5 seconds.
With this function, you can reset the device to factory default settings.
Press
[MENU] , then [UP] or [DOWN] until the display shows ‘System Reset’ . Press [ENTER] . The
device now performs a reset.
Temperature display
Selftest
Software version
Default settings
Operating
moving head
36