thomann Stairville Quad Par Profile, Руководство пользователя

Страница: 42 / 68

7.4 Remote control
A preprogrammed automatic show can only be activated when the unit is operating alone or
as master in a master-slave combination. This setting is only relevant if the device is not con‐
trolled via DMX.
Press
[MANUAL] . The display shows ‘Pr.xx’ . Now you can select one of the preprogrammed
automatic shows. Use [+] and [–] to select a value between ‘Pr.01’ and ‘Pr.10’ .
Press [SPEED] to adjust the programme speed. The display shows ‘SP.xx’ . Use [%] , [+] and [–] to
select a value between ‘SP.01’ (slow) and ‘SP.FL’ (fast).
Press [STROBE] to set the flash frequency. The display shows ‘FS.xx’ . Use [%] , [+] and [–] to
select a value between ‘FS.00’ (slow) and ‘FS.99’ (fast).
The automatic mode can only be activated when the unit is operating alone or as master in a
master-slave combination. This setting is only relevant if the device is not controlled via DMX.
Press
[AUTO] . The display shows ‘AUTO’ , the playback of the built-in automatic programme
starts automatically.
Operating mode ‘Preprog‐
rammed automatic show’
Operating mode ‘Automatic’
Operation
LED PAR
42