thomann STAIRVILLE M-Fog 3000 Pro, Руководство пользователя

Страница: 29 / 48

NOTICE!
Fire hazard
Do not operate the machine unattended.
Connect the device to the mains power grid and turn it on with the main switch.
As soon as the required operating temperature is reached, the display shows
‘READY’ .
When operating, always ensure that there is sufficient fog fluid in the liquid container. The
built-in protection circuit prevents the fluid pump from running dry
An electronic protection circuit switches off the pump when the liquid container and hose are
empty.
If the protection circuit is triggered, the display flashes and shows
‘WARNING! Fluid ERROR 3’ .
Refill fog fluid and activate the protection circuit either via DMX or press [ENTER] .
Turn off the power using the main switch. Transport the device only when it is completely
cooled down. To avoid leaking fog fluid during transport, you should transport the device only
with empty fluid container.
Turning the unit on
Dry-run protection
Turning the unit off
Operating
M-Fog 3000 Pro
29