thomann Stairville DCL Flat Par 18x4W CW/WW, Руководство пользователя

Страница: 32 / 52

A preprogrammed automatic show can only be activated when the unit is operating in stand
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
Press
[Mode] repeatedly, until the display shows ‘Pro’ and press [Setup] . Now you can select
one of the preprogrammed automatic shows. Use [Up] and [Down] to select a value between
‘Pr.01’ and ‘Pr.05’ .
Settings for programme 01:
For
‘Pr.01’ , you can choose from 3 predefined colour temperature values. Press [Setup] . With
[Up] and [Down] you can now select one of the following colour temperature values:
n
0 – ‘OFF’ : Off
n
1 – ‘-U’ : Warm white
n
2 – ‘-C’ : Cold white
n
3 – ‘UC’ : Warm and cold white
n
n
To adjust the strobe frequency, press again
[Setup]
. The display shows
‘FS.xx’
. With
[Up]
and
[Down] you can now select a value between ‘FS.00’ (slow) and ‘FS.99’ (fast).
Operating mode ‘Preprog‐
rammed automatic show’
Operating
LED PAR
32