thomann Stairville All FX Bar, Руководство пользователя

Страница: 7 / 40

2 Safety instructions
This device is intended for use as an electronic lighting effect by means of LED tech‐
nology and for the projection of laser light effects. The device is designed for profes‐
sional use only and is not suitable for use in households. Use the device only as
described in this user manual. Any other use or use under other operating conditions
is considered to be improper and may result in personal injury or property damage.
No liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intel‐
lectual abilities and having corresponding knowledge and experience. Other persons
may use this device only if they are supervised or instructed by a person who is
responsible for their safety.
Extend the operating life of the device by regular breaks and by avoiding
frequent switching on and off. The device is not suitable for continuous
operation.
It is based on DIN EN 60825-1: 2015. The corresponding accident prevention regula‐
tion of the professional association in Germany is DGUV V11.
This device uses a class-2M laser. It is equipped with a safety key and a connection for
an external safety switch. Always remove the safety key when the device is not oper‐
ated.
Safety
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking
hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces
and choke! Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable
parts inside. Do not use the device if covers, protectors or optical components are missing or damaged.
DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a protective contact plug. Do not modify the mains
cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a registered electrician.
DANGER!
Laser radiation – avoid exposure to beam
The device uses a class-2M laser, classified according to EN 60825-1:2015. In this context take extreme care when using con‐
verging optical instruments.
WARNING!
Laser radiation – safety switch required
The laser beam must be defeatable any time during operation, to avoid hazards by faults, unsafe operation conditions, or disturb‐
ance within the audience. Therefore you have to connect a safety switch (emergency shut off) to the unit, by which you can
switch off the laser any time even from a remote observation point (e.g. FOH position).
Intended use
Laser safety basics
Safety instructions
All FX Bar
7