thomann Stairville 150-R MKIII, Руководство пользователя

Страница: 39 / 60

Press [FUNC] repeatedly until the display shows
0 0 1
. Now you can set the number of the first
DMX channel to be used by the device (DMX address). Use the [UP] and [DOWN] buttons to
select a value between 1 and 505. Press [ENTER] to save the value and to start operation in
‘DMX’ mode.
Make sure that this number matches the configuration of your DMX controller.
Press [FUNC] repeatedly until the display shows
S L A
. In this mode, the device exactly follows
the operation of the master that it is connected to. Press [ENTER] to confirm and to start opera‐
tion in ‘Master / Slave’ mode.
Press [FUNC] repeatedly until the display shows
r E N
. Press [ENTER] to confirm and to start
operation in 'Remote control' mode.
This mode allows you to operate the device conveniently with the infrared remote control.
Make sure that the infrared receiver on the front panel of the device is not obstructed.
Operating mode ‘DMX’
0 0 1
Master/slave mode
S L A
Remote control mode
r E N
Operating
DJ Lase 150-R MK-III
39