thomann Stairville 150-R MKIII, Руководство пользователя

Страница: 36 / 60

7 Operating
7.1 Starting and stopping the device
Perform the following steps to start up the device:
1.
Verify that all required laser safety precautions have been taken. Make sure that there is
no one in the reach of the laser beam.
2.
Connect an external safety switch [REMOTE] (10) to the port (e.g. emergency stop) or any
other installation using a protection function.
3.
Insert the safety key into the lock (9).
4.
If not already connected, connect the device to the mains (5).
5.
After a few seconds, the fan and the motors start to work. The display shows the current
operation mode. The device is now operational.
6.
Turn the safety key (9) to the “ON” position to turn the laser beam on.
Starting
Operating
showlaser
36