thomann MIX 1202, Руководство пользователя

Страница: 5 / 16

5
Control Elements
Mono MIC Input
q
The MIX series is equipped with one or more low-noise
microphone preamplifiers with optional phantom power providing
up to 50dB of amplification. You can connect almost any type
of microphone. Dynamic microphones do not need phantom
power. Use phantom power only with condenser microphones but
make sure that the phantom power switch is disengaged before
connecting the microphone. Phantom power will not damage
your dynamic microphones but it may damage tube or ribbon
microphones so make sure to read the microphone instructions
manual before engaging phantom power switch. The input is
also equipped with 1/4“ TRS balanced and TS unbalanced LINE
IN plug, you can connect with line-level instruments, such as
synthesizers, keyboards, drum machines or effect devices.
NOTE: Never try to connect a line-level signal to the XLR MIC
input when the phantom power is engaged, doing this you may
seriously damage your equipment.
LINE INPUTS
w
They are organized in stereo pair and provided with 1/4“ TRS
sockets. It is used to connect the stereo device, plug both the left
input and the right input. Using the left input if connect a mono
input signal to the STEREO INPUT, the signal will appear on both
sides.
GAIN CONTROL
e
This GAIN control is used to control the input sensitivity of the MIC and LINE inputs. The adjustable range
goes from 0 dB to 50dB.
EQUALIZATION
The MIX series has 3-band EQ on all mono channels (except MIX 502 has 2-band EQ). And only the MIX 802
has EQ controls on stereo channels. All bands provide up to 15 dB boost or cut.