7.3 Operating mode ‘Sound Mode’
This setting is only relevant if the device is working as Slave in a Master / Slave configuration
and is not controlled via DMX. In this operating mode, the device responds to acoustic pulses
which are recorded by the integrated microphone.
1.
Press
[Mode]
, use
[Up]
and
[Down]
to select the menu item
‘SOUND’
and confirm with
[Setup]
.
2.
Use
[Up]
and
[Down]
to select the sensitivity of the built-in microphone in a range from
‘00’
…
‘31’
(minimum … maximum sensitivity) and confirm with
[Setup]
.
ð
The unit will cycle through the preprogrammed automatic programs and will be
controlled by the music.
7.4 Operating mode ‘Slave’
This setting is only relevant if the device is working as Slave in a Master / Slave configuration
and is not controlled via DMX.
Operating
Retro Flat Par 18x10W RGBWA UV, 18x12W RGBW, 18x12W RGB WW
37
