TI120 Series Variable Frequency Drive
Operation Keyboard and Trial Operation
- 22 -
occasions. One variable frequency
drive can only drive one motor, such
as machine tools, wire drawing
machines and other loads requiring
high torque output.
2:PG vector control (VC)
When adopting this control method,
an encoder must be installed at the
tail end of the motor. It is suitable for
high-precision speed control or
torque control. One variable
frequency drive can only drive one
motor, such as lifting, slitting
machines, winding and unwinding,
etc.
3.2.3 Start and stop commands and modes
1)
Start and stop command sources
Function code
Setting range
Application description
P01.00:
running
command
given method
0: keyboard command mode
Start and Stop of the variable frequency drive
are controlled by operating the "start" and "stop"
keys on the keyboard.
1: terminal command mode
Control the start and stop of the variable
frequency drive by setting the multi-functional
input X terminal as FWD, REV, FJOG and
RJOG commands.
2: communication command
mode
Through communication with the upper
computer, start-stop control of the variable
frequency drive is carried out.
3: multi-segment command
mode
The multi-functional input X terminal is set as a
multi-stage frequency command to directly
control the start and stop of the variable
frequency drive.
2)
Start and Stop Mode Selection
Function code
Setting range
Application description