Stowaway
®
Universal Bluetooth
®
Keyboard
for Pocket PC
Quick Start Guide
Before installing the Stowaway Universal Bluetooth Keyboard application on your Pocket PC device,
it is a good idea to back up your data using ActiveSync
®
. Please delete any other keyboard software
you have previously installed on your device to avoid potential conflicts.
This software application enables your handheld device to interact with the external keyboard. You
will need at least 300KB of memory for the keyboard application.
Battery Installation:
1.
Remove the battery door on the base of the keyboard.
2.
Insert two (2) AAA batteries (included) inside the battery compartment.
3.
Replace the battery door.
Opening and Closing the Keyboard:
1.
To Open: Lift the stand, press the button on the left side of the keyboard and swing the right
section open.
