Stowaway Travel Mouse Owner’s Manual Page 6
Configuring the Mouse to Your Pocket PC Device
1.
After the driver installation completes, the
Stowaway Settings
screen will display and
you will be prompted to
Choose device to
setup
. Select the
Stowaway Travel Mouse
and tap
Setup
.
2.
The
Select mouse pointer mode
screen will
display for selecting Enhanced or Safe pointer
mode:
a.
Enhanced
mode – Works for most
PDAs. Try Enhanced mode first.
b.
Safe
mode – In the event that display
issues arise with Enhanced mode, select
Safe mode. It works for all PDAs, but
may leave pointer traces on display.
Prior to selecting a mode, you may want to
synchronize your PDA to back up your data.
3.
Select
Yes
at the next screen to reset the PDA and apply the pointer
mode.
4.
Once the PDA resets,
the
Confirm mouse
pointer mode
screen
will display. If the PDA
display is working
properly, accept
Enhanced mode by
selecting
Enhanced
again, and tapping
OK
.
Otherwise, select
Safe
and tap
OK
.