THine THCV245 A, Руководство пользователя

Страница: 9 / 67

Preliminary
THCV245A_Rev.0.90_E
Copyright©2020 THine Electronics, Inc. THine Electronics, Inc.
Security C
9/67
6.5 V-by-One® HS output setting
Setting of V-by-One® HS output format can be configurable by 2-wire access to internal register.
Table 3. V-by-One® HS output format setting
6.5.1 MPRF (Main-Link PRivate Format)
MPRF format encoding preserves original data packet input to THCV245A and output the data packet from
counterpart V-by-One® HS receiver. The counterpart receiver must have installed MPRF format decoder like
THCV242 because MPRF is not standard format.
Output V-by-One® HS Byte Mode is 4Byte Mode.
Video formats: RAW8/10/12/14/16/20, YUV422/420, RGB888/666/565, JPEG, and User-defined generic 8-bit
are all supported with MPRF.
Figure 4. MPRF (Main-Link PRivate Format)
Addr(h) Bits Register w idth R/W Description Default
0x1000 [0] R_VX1_LANE 1 R/W
V-by-One® HS output lane number setting
0:1lane
1:2lanes
1'h1
0x1001 [6:4] R_OUTPUT_FMT 3 R/W
V-by-One® HS output f ormat setting
000:Main-Link PRivate Format (MPRF)
001:V-by-One® HS Standard YUV422(16bit)/RAW8
010:V-by-One® HS Standard RGB888
011:V-by-One® HS Standard RGB565
100:V-by-One® HS Standard RAW10 Mode1
101:V-by-One® HS Standard RAW12 Mode1
110: V-by-One® HS Standard RAW10 Mode2
111: V-by-One® HS Standard RAW12 Mode2
3'h0
0x1002 [5] R_HFSEL 1 R/W
V-by-One® HS HFSEL (High Freq. SELect) mode Enable
0:HF Mode Disable
1:HF Mode Enable
1'h0
0x1055 [1:0] R_BITMAP_SEL 2 R/W
V-by-One® HS output data mapping select
00:MAP1, 01:MAP2, 10:MAP3, 11:MAP4
2'h0
THCV245A CMOS Sensor THCV242 Processor
In ECU or
controller
Original
Data packet
(format,
payload, etc.)
Preserved
Data packet
(format,
payload, etc.)
Main-Link
MPRF
format