© Adolf Thies GmbH & Co. KG · Hauptstraße 76 · 37083 Göttingen · Germany
021821/08/21
Tel. +49 551 79001-0 · Fax +49 551 79001-65 · [email protected] ·
Page 69 of 102
7.2.23 Command MM
<id>MM<parameter><CR> Output der instantaneous values
Access:
Reading / writing
Description:
With the command MM, all configured instantaneous values are
output in lines, with pre- and post-text (channel name / unit).
If the call takes place with the parameter STS, the status words
are output in brackets in addition to the instantaneous values.
Parameter description:
ADC Output of the raw values of the ADC
STS
Output der instantaneous values with status word
Value range:
Initial value:
7.2.24 Command MM_MEAN
<id>MM_MEAN<parameter><CR> Output of the average values
Access:
Reading
Description:
With the command MM_MEAN, all current measured
values are output in accordance with configuration, in
lines, with pre- and post-text (channel name / unit).
Parameter description:
Value range:
Initial value:
7.2.25 Command MM_EX
<id>MM_EX<parameter><CR>
Output of the extreme values
Access:
Reading
Description:
With the command MM_EX, all current extreme values
are output according to the configuration, in lines, with
pre- and post-text (channel name / unit).
Parameter description:
Value range:
Initial value:
