The Contractors Choice
thermOweld
®
ECN 2341 REV "D" 4/12/10 34-5381-40
+1 (918) 627-5210 • 1-800-558-1373 • WWW.THERMOWELD.COM
ELECTRICAL GROUNDING • CATHODIC PROTECTION • ELECTRIC UTILITY • RAIL
thermOweld
®
Tel. +1.800.558.1373
4102 South 74th East Ave
Tel. +1.918.627.5210
Tulsa, OK 74145 USA
www.thermoweld.com
INSTRUCTIONS FOR THERMOWELD GROUNDING CONNECTIONS - TYPE CX-7 MOLDS
1. See reverse side for preparation of
cable and rail surfaces.
2. Place sleeve on the end of the cable
allowing cable to extend past end of
sleeve 1/8" and place into the hammer die.
3. Strike the lid of the hammer die with a
hammer to form the end of the cable.
4. Insert formed end of the cable into the
mold, making sure the end of the cable is
to the center of the tap hole.
5. Follow instruction on reverse side of this
sheet for welding instructions.
HAMMER DIE
