22
• Grill2Go
Match Lighting
1. Push Regulator/Valve in and turn
counterclockwise to LIGHTING
POSITION.
2. Attach match to match lighting stick,
light match.
3. Insert match lighting stick into vent
hole at rear of grill.
WARNING
If burner does not light within 5 seconds, turn knob to OFF, wait 5 minutes, try again.
Burner Flame Check
Before Your First Cookout.
Leak test your grill.
Turning Grill Off
Light burner. Look through viewing glass on front of grill and make
sure burner stays lit while rotating the regulator knob from HIGH to
LOW. Always check flame prior to each use.
Light burners, check to make sure they are lit, close the lid and warm up
grill on HIGH for 10 minutes. Curing of paint and parts will produce an odor only on first lighting.
• Turn knob to OFF position. Make sure regulator/valve pops up. If it does not, discontinue
use and order new part.
• Disconnect 1 lb. cylinder or turn off valve on 20 lb. cylinder.
Vent hole
Heat Indicator
Indication of warming
up or cooling down.
Too hot. Will damage
non-stick surface.
Cooking Zone