Thermopatch HS-21-SQR Penguin, Руководство пользователя, Страница: 9 / 30

thermopatch.com
9
5. Overview of safety measures and warnings
5.1 Safety
The HS-21-SQR has been equipped with various safety features to ensure safe operation.
1. Safety thermostat
The safety thermostat is installed to prevent overheating when the controller should fail. It
switches off the power to the heating element when the temperature exceeds 260°C.
If this happens, the machine has to be checked by a qualified technician.
2. Acoustic signal
Once the press cycle is complete an acoustic signal will be sound after which the press must
be opened.
3. Automatic Switch-Off
When the HS-21-SQR is not opened after 10 seconds it will automatically switch off to
prevent damaging it.
4. Warning symbols
The HS-21-SQR is marked with appropriate heat radiation safety symbols on either side of
the press head and the hazardous voltage symbol next to the power inlet on the back.

WARNING!
Hot surface

WARNING!
Electric tension
Safety tips
The customer service of your distributor has its own service engineers, and if required,
maintenance is available. A maintenance contract ensures prompt service in the
event of appliance failure together with additional periodic inspections.
Under normal conditions accidents are rare; however, listed below are some practical points
to ensure your safety:
• Pull out the electrical plug from the wall socket when doing maintenance or cleaning work
on the appliance.
• Ensure that there is sufficient space around the appliance. Cables and connections must
not get jammed. Although the heat radiation of the press is low, there should be enough
space for cooling down.
• Avoid contact with the heating element.