5
26-1-16
C-TICK
The equipment referred to here complies with requirement of AS/NZS 1044:1995
electromagnetic interference (EMI).
INSTALLATION (Refer to Unpacking Page 3)
Place the equipment in a well-ventilated area, on a firm level surface and ensure that
a suitable power supply is available.
WARNING:
Ensure that the electrical
outlet is earthed and is of the correct
voltage and is capable of carrying the
equipment stated current load (AMPS).
The model TFB is suitable for bench top use only.
MAINTENANCE
The Thermoline Scientific Flotation bath requires no routine maintenance other than
normal levels of cleanliness.
The glass insert may be removed for cleaning.
The external case and the stainless steel surfaces may be wiped clean using a
damp, soft cloth.
Note:
Stainless steel is under most conditions extremely resistant to corrosion. This
is in part due to the addition of chromium and nickel to the steel and the formation of
a durable chromium oxide at the surface during the manufacturing process. There
are several chemicals which will attack the surface of stainless steel.
Always have in place a program of regular cleaning using a soft
damp
cloth with a
mild solutions of soap and water and allow to dry.
TECHNICAL ASSISTANCE
If you require additional operational or technical information regarding this equipment
please contact:
Thermoline Scientific
Customer Service Division
Telephone:
+61 2 9604 3911
Facsimile:
+61 2 9725 1706
