ThermoFLUX EcoLogic 25, Руководство пользователя

Страница: 14 / 72

14
The room where the boiler is installed must be frost-resistant
The boiler must not be exposed to colds or freezing temperatures. Extreme cold can cause
malfunction and unexpected behavior of electronic components.
Fresh air supply
For combustion of pellets and normal work boiler needs fresh air. The room in which the
boiler is installed must have an opening for fresh air supply. The recommended minimum
dimension is 30x15 cm.
Boiler safety devices
The boiler is equipped with safety systems which, in the case of
unforeseen situations, serve to stop the power supply and thus stop
the boiler operation.
Microprocessor control on the boiler: intervenes directly, turns off the boiler until
it cools down and shows an error on the display screen in case of a failure of flue
gas fan, malfunction of the dispenser engine, failure of the ignition.
Fuse: Quick fuse, protects the boiler of large current drops and short circuit inside
the boiler .
Safety Thermo Switch (STB): If boiler overheats (at 90 ° C), all pumps in the
system turn on, attempting to cool the boiler. If this fails and the temperature
continues to increase, the STB intervenes by sending the signal to the regulation,
ERROR BOILER OVERHEAT and STB ACTIVATED are displayed and the boiler
stops working. After the boiler is cooled, it is necessary to manually reset the switch
and start the boiler.
Safety switches
– in case the door is not closed, the grate in the burner does not
return to its original position, an error is shown on the display and the boiler stops
working.