ThermoFlow HS1500NA, Руководство пользователя

Страница: 4 / 20

EN
4
3 IN PACKING
2x
2x
4x
2x
Part A Part B
Part C Part D
Infrared Radiant Heater
1x
Remote Controller
1x
TIMER
ON/OFF
4 MOUNTING INSTRUCTIONS
Environment
Please recycle packaging.
Disposal of the device
Old devices must not be disposed of in your household waste!
Please bring old appliances to the appropriate recycling center nearest to you.
Connect to a properly grounded power supply.
Before the installation of wiring, please check that the proper voltage is available.
Avoid danger from damaged power supply cables. In the event of a damaged power supply
cable, the unit should be unplugged and the cable replaced by a licensed electrician imme-
diately.
Ensure that the addition of this device will not overload the fuse protection in
your electrical panel. Internal modifications to the product may cause problems
if this work is not carried out by authorized and qualified technical persons. The
warranty only applies if the product has not been modified in any way, i.e. sub-
ject to it being in unchanged condition.
The device must be installed at least 83”(210 cm) above floor level. The recom-
mended height is 90”(230 cm).
The rear face of the appliance must be positioned at least 3”(6 cm) from the wall
and /or ceiling. A minimum of 12”(30 cm) of unobstructed space must be present
in front of and at each side of the device.
Do not place any objects under the device within a radius of 40”(100 cm).
Make sure at all times that the surface of the device is not in contact with other
objects.
Do not position the device underneath a power socket.
Make sure that you place the device in a position where there is no risk of easily
touching the heating surface.
manual thermoflow far infrared heater -en & fr.indd 4 2019/11/12 17:14