3
1
1
2
4
Figure 5 Instrument
‑
to
‑
computer connections (barcode scanner connected to the computer)
Minitower configuration
1
Detachable power supply cord compatible with local power supply receptacle.
2
Connection between the computer and the instrument.
3
Connection between the computer and the monitor, keyboard, and mouse.
4
Connection between the computer and the
(optional)
handheld barcode scanner.
Unpack and install the instrument
1.
Prepare the installation site as described in the
QuantStudio
™
1 Plus Real-Time PCR System Site
Preparation Guide
(Pub. No. MAN0024787).
2.
Follow the pre-printed instructions on the instrument box to unpack the instrument, accessories,
and reference documentation. Save the packing material for future use or recycle it.
The instrument box contains:
• Reference documentation: Welcome note, unpacking and set up instructions card, system
documentation insert
• One instrument
• Accessories: power cable, Ethernet cable, USB drive, reaction tube retainer
• Shipping plate
Note:
Save the shipping plate but do not use it to operate the instrument.
If you ordered the wireless adapter, it is provided separately.
3.
Place the instrument on the bench.
4.
Plug the power cable into the power port on the back panel of the instrument, then plug the cable
into an electrical receptacle.
Appendix A
Install and connect the instrument to a network
Unpack and install the instrument
A
82
QuantStudio
™
1 Plus Real-Time PCR System Installation, Use, and Maintenance Guide
