ThermoFisher Scientific QuantStudio 1, Инструкция по установке, эксплуатации и обслуживанию

Страница: 11 / 110

To use a custom dye on the instrument, review the following requirements:
• Calibrate the instrument for the custom dye (see “Calibrate custom dyes”
on page 65 ).
• Ensure that the custom dye excites and emits within the wavelength range of the filters (see Table 1
on page 10 ).
• Select a custom dye that does not overlap with other dyes that are used in the run (see Table 1
on
page 10 ).
Parts of the instrument
1
2
3
1
Touchscreen —Controls the instrument.
2
USB port —For connection to an external network drive or external data storage device.
3
Instrument drawer —Holds the sample plate.
The instrument includes three additional USB ports on the back of the instrument.
Note: The instrument recognizes only one external storage device at a time for data transfer.
Chapter 1
Product information
Instrument hardware description
1
QuantStudio ™ 1 Plus Real-Time PCR System Installation, Use, and Maintenance Guide
11