ThermoFisher Scientific Orion Lab Star EC112, Руководство по эксплуатации

Страница: 11 / 40

Orion Lab Star EC112 Conductivity Meter 11
2.5 Meter Connections
Input Function
Power Universal power supply
GND Ground
Export Connection to printer or computer
MiniDIN Connection to conductivity electrode
2.6 Electrode Information
The Orion Lab Star EC112 conductivity meter is
compatible with 2-cell and 4-cell conductivity electrodes
with a MiniDIN connector. The Orion Lab Star EC112
conductivity meter can be purchased in a meter only
configuration (purchase electrode separately) or kitted with
a conductivity electrode.
Refer to the electrode instructions for specific care and
maintenance procedures. The following are general
recommendations for electrode preparation.
Remove the packaging from the electrode and save
for storage.
Rinse the electrode using distilled water.
Connect the electrode to the meter.
2.7 Meter Startup
Sequence
When the meter is powered on, it displays a set of startup
screens, starting with all segments lit screen, followed by
the meter info screen and then the meter self-test screen.
The meter info screen shows the meter model number and
current software revision.
After the meter info screen, the meter performs a series of
internal self-tests to verify that the meter is operating
correctly and then the self-test results are shown.
Finally, the meter proceeds to the main measure mode.