manualshive.com logo in svg

ThermoFisher Scientific HERASAFE 2030i Series, Руководство по эксплуатации

Поделиться
Скачать
ThermoFisher Scientific HERASAFE 2030i Series Скачать руководство пользователя страница 41

Herasafe 2030i / Maxisafe 2030i

50155215

 |  

31

Start-up

Initial Operation

Prior to initial operation, the safety cabinet must be subjected to an installation test. Correct 
assembly and installation performed by the operator are essential for good start-up.

Installing Unit and Accessories

Herasafe 2030i version:

Device without stand:

Place the device without stand onto a sufficiently stable substructure so that the 
weight of the device frame does not rest upon the drain pan.

Remove the protective foil from the worktops and arm rests.

High lever load!
Depending on the size, the units have a weight of 170 kg to 280 kg, see Techni-
cal data.
Lift the unit with an appropriate lifting device.

Содержание HERASAFE 2030i Series














































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды