UM-0090-B1E
DT90 Range User Manual
Page 10
RG
Configuration
Page Description
Configuration
menu provides simple and intuitive access
to the logger’s operation, Select
Configuration
option from
the main menu to access the configuration window.
Configuration windows comprises the following elements:
-
Properties Pane
on the right hand side is used to display various setting depending on menu selection. User
can define these setting according to requirements.
-
Menus on the left hand side are used to access each configuration setting. There are four menus:
Sensors
,
Global Sensor Settings
,
Data Transmission
and
Alarm
. Clicking on a menu will reveal menu items and each
item selection would be displayed in the properties pane.
-
The banner area along the top screen contains one
Home
button which provides a link back to Main Menu and
two information tags:
Station Name
and
Logger Type
.
-
The bottom of the screen displays
Connection Status
to the logger.
Figure 3: Configuration Windows
Sensors
Sensors menu
is used to create measurement channel based on sensor’s output signal. There are 2 possible “maximum
number” of available channels in a logger unit depending on firmware version, 13 channels (factory default) and 26
channels (optional).
The above selection will determine the number of maximum data point to be recorded in FLASH memory, with 16 MB in
size the logger can hold 260,000 data points (for 13 channels) or 130,000 data points (for 26 channels).
13
channels
Date
Time
Zone
Empty1
Empty2
Empty3
…
Empty12
Empty13
26
channels
Date
Time
Zone
Empty1
Empty2
Empty3
…
Empty25
Empty26
Table 1: Logger memory mapping
