4
A. General
1. General diagram
Figure Nº 1 shows a general diagram of the instant heater and table Nº1 description of the parties.
Figure Nº1 Titan Parts
Table Nº 1 Titan Parts
Part
Description
1
Cold water Inlet
2
Hot Water Outlet
3
Resistors Access
4
Access thermostat
5
Heater Body
6
Holder
7
Electrical Connection
2. Applications
At TITAN PLUS instant heater can give applications: sinks, lavatories, toilets, tubs, in general, in all
those places where you want to have access to hot water.
B. Installation
In order to have a good installation of your titan plus, follow the instructions show bellow:
1. Location of the Heater
The instantaneous water heater must be installed near or centralized applications, and must be
protected from moisture and weather.
It can be installed on a surface or can be attached to a wall but ALWAYS be installed vertically and
away from children should not be installed on ceilings or attics or in places where water spillage could
cause damage to flooring furniture, it is also preferable that in place of the installation possesses
access to a drain or drain to drain water that the pressure relief valve releases.
