Thermo Scientific Vanquish Charger, Руководство по эксплуатации

Страница: 52 / 88

6 • Operation
Page 52 Vanquish Charger Operating Manual
Closing the Front Door
After you have closed the door, the Charger will perform a startup
routine and inventory scan. The mover moves down to the bottom of
the shelf and flashes its barcode reader. Once the inventory scan has
completed, the
Mover Status LED on the front panel turns from blinking
green to green.
Notes on Loading the Carousel of the Autosampler
NOTICE
The Charger delivers sample racks and well plates to segment Y.
Observe the following to avoid operating problems and damages:
•
Always leave segment Y (yellow) of the autosampler carousel empty.
•
Do not manually remove any sample racks or well plates from
segment Y during normal operation.
6.4.3 Selecting the Rack Type
The Charger automatically detects the container type for Vanquish
sample racks and well plates with a barcode for rack type identification,
and the software calculates the correct autosampler needle position.
You do not have to select a rack type. However, you must select a rack
type for sample racks and well plates without such a barcode.
For details how to select the rack type, refer to the
Chromeleon Help
.