Thermo Scientific UCI-100, Руководство по эксплуатации

Страница: 51 / 62

Universal Chromatography Interfaces
UCI-50 and UCI-100
Operating Instructions Page 45
6 Technical Information
Analog inputs:
Number UCI-100: 8 (independent); UCI-50: 2 (independent)
Max. input voltage
± 0 Volt (bipolar)
Input impedance (analog)
> 10
7
Ω (static)
Dynamic resolution 25 bit
Number of input ranges 8 (with autoranging)
Resolution
< ± 1 µ V
Voltage noise
< 2 µ V, peak to peak
Offset (absolute)
< ± 10 µ V
Voltage drift
≤ 20 ppm/ ° C (on each range)
Sampling rate 100 Hz per channel
Linearity (0-5000 mV) Correlation coefficient > 99.9999%, RSD < 0.15%
Digital Inputs:
Number 8 (TTL compatible)
Input voltage (digital) 0–5 Volts
Relay outputs:
Number 8
Functionality Default open
Switching capacity 100V, 0.5A, 10W max.; potential free
RS-232 ports:
Number 4
Baud rate Up to 9600 baud (all channels)
Up to 19200 baud (two channels)
Up to 38400 baud (one channels)
Handshake RTS/CTS hardware or Xon/Xoff software
PC interfaces: USB version 1.1; Ethernet LAN: 10BASET (RJ45 connector)
Miscellaneous
Environmental conditions: Range of use: Indoor use
Temperature: 10 °C to 35 °C (50 to 95 °C)
Air humidity: 40 to 85% relative humidity, non-condensing
Overvoltage category: II
Pollution degree: 2
Weight 1.95 kg
Dimensions (H x W x D) 71 x 285 x 220 mm
Technical information: November 2010. All technical specifications are subject to change
without notice.