background image

Regulatory Statements and Warranty

  

A

Thermo Scientific

TruNarc User Guide  

57

Limited Warranty

Seller warrants that the Products will operate or perform substantially in conformance with 
Seller's published specifications and be free from defects in material and workmanship, when 
subjected to normal, proper and intended usage by properly trained personnel, for the period 
of time set forth in the product documentation, published specifications or package inserts. If 
a period of time is not specified in Seller’s product documentation, published specifications or 
package inserts, the warranty period shall be one (1) year from the date of shipment to Buyer 
for equipment and ninety (90) days for all other products (the “Warranty Period”). Seller 
agrees during the Warranty Period, to repair or replace, at Seller's option, defective Products 
so as to cause the same to operate in substantial conformance with said published 
specifications; provided that Buyer shall (a) promptly notify Seller in writing upon the 
discovery of any defect, which notice shall include the product model and serial number (if 
applicable) and details of the warranty claim; and (b) after Seller’s review, Seller will provide 
Buyer with service data and/or a Return Material Authorization (“RMA”), which may include 
biohazard decontamination procedures and other product-specific handling instructions, 
then, if applicable, Buyer may return the defective Products to Seller with all costs prepaid by 
Buyer. Replacement parts may be new or refurbished, at the election of Seller. All replaced 
parts shall become the property of Seller. Shipment to Buyer of repaired or replacement 
Products shall be made in accordance with the Delivery provisions of the Seller’s Terms and 
Conditions of Sale. Consumables are expressly excluded from this warranty. 

Notwithstanding the foregoing, Products supplied by Seller that are obtained by Seller from 
an original manufacturer or third party supplier are not warranted by Seller, but Seller agrees 
to assign to Buyer any warranty rights in such Product that Seller may have from the original 
manufacturer or third party supplier, to the extent such assignment is allowed by such original 
manufacturer or third party supplier. 

In no event shall Seller have any obligation to make repairs, replacements or corrections 
required, in whole or in part, as the result of (i) normal wear and tear, (ii) accident, disaster or 
event of force majeure, (iii) misuse, fault or negligence of or by Buyer, (iv) use of the Products 
in a manner for which they were not designed, (v) causes external to the Products such as, but 
not limited to, power failure or electrical power surges, (vi) improper storage and handling of 
the Products or (vii) use of the Products in combination with equipment or software not 
supplied by Seller. If Seller determines that Products for which Buyer has requested warranty 
services are not covered by the warranty hereunder, Buyer shall pay or reimburse Seller for all 
costs of investigating and responding to such request at Seller's then prevailing time and 
materials rates. If Seller provides repair services or replacement parts that are not covered by 
this warranty, Buyer shall pay Seller therefor at Seller's then prevailing time and materials 
rates. ANY INSTALLATION, MAINTENANCE, REPAIR, SERVICE, RELOCATION 
OR ALTERATION TO OR OF, OR OTHER TAMPERING WITH, THE PRODUCTS 
PERFORMED BY ANY PERSON OR ENTITY OTHER THAN SELLER WITHOUT 
SELLER'S PRIOR WRITTEN APPROVAL, OR ANY USE OF REPLACEMENT PARTS 
NOT SUPPLIED BY SELLER, SHALL IMMEDIATELY VOID AND CANCEL ALL 
WARRANTIES WITH RESPECT TO THE AFFECTED PRODUCTS.

Содержание TruNarc































































Отзывы: