Thermo Scientific TruDefender FT, Руководство пользователя, Страница: 32 / 56

30
TruDefender FT and TruDefender FTi User Guide Thermo Scientific
4 Reviewing Stored Scans and Sending Messages
Reading the Wireless Service Icons
When the radio is enabled, signal strength bars and
service icons appear at the top right of every screen.
The instrument uses different services for email and
SMS transmissions.
Just like a mobile phone, the signal strength bars
roughly indicate radio signal strength, not transmission
speed.
The service icons include:
• Reachback (an email service)
• Email
• SMS
Wirelessly Sending a Scan
You can send a scan to a contact immediately after the
result appears, or you can send a stored scan.
NOTE
By default, when you email a scan the
instrument attaches the scan report file to the
email. You can change this default to send other
types of files (see
page 33 ).
TIP
You can add a new contact and immediately
send a scan to it (see
page 31 ).

To send immediately after a scan finishes
1
When the result appears, press the Enter key > select
Export Scan > press the Enter key.
2
Select Wireless > press the Enter key.
The instrument enables the radio, and the contact
list appears. (The instrument disabled the radio
during the scan.)
3
Select a contact > press the Enter key.
 To send a stored scan
1
In the Main menu, select Review > press the Enter
key.
2
Select a scan to send > press the Enter key.
3
Select Export Scan > press the Enter key.
4
Select Wireless > press the Enter key.
If necessary, the instrument re-enables the wireless
radio.
5
Select a contact > press the Enter key.