Thermo Scientific Thermo Scientific Vanquish VC-D40, Руководство по эксплуатации

Страница: 19 / 174

2 • Safety
Variable Wavelength Detectors (VC-D40, VF-D40)
Operating Manual Page 19
2.1.3 Safety Symbols on the Device
The table lists the safety symbols that appear on the device or on labels
affixed to the device. Follow the safety notices in this manual to prevent
the risk of operator injury or damage to the device.
Symbol Description
Indicates a potential hazard. Refer to this manual to avoid the risk of
personal injury and/or to prevent damage to the device.
—
Ο
Power supply is on
Power supply is off
Indicates alternating current.
Indicates that the surface becomes hot during operation. Do not
touch these surfaces while they are heated up.
Indicates that the UV radiation produced by the deuterium lamp in
the device may be harmful to eyes and skin. Do not look directly into
the light produced by the deuterium lamp. Never operate the lamp
outside the device.
2.1.4 Rating Plate
The rating plate is present on the device near the electrical connections.
The rating plate indicates the serial number, part number, module
name, revision number (if any), line and fuse rating, and the
manufacturer's address.
TIP An additional type label on the leak tray of the device indicates the
module name, serial number, part number, and revision number (if any).
To facilitate device identification, have the information from this label
available when communicating with Thermo Fisher Scientific.