manualshive.com logo in svg

Thermo Scientific Sorvall ST Plus Series, Инструкция по эксплуатации, Страница: 81 / 172

Поделиться
Скачать
Thermo Scientific Sorvall ST Plus Series Скачать руководство пользователя страница 81

3-49

Graphical User Interface

Figure 3–71:  Chart Details Screen

5.  Use finger gestures to move around the chart:

 

»

Pinch to zoom in and out.

 

»

Swipe left or right to navigate back in time or back to the current time.

 

»

Tap and drag to scroll to a specific time period.

Exporting Chart Data

Proceed as follows to export chart data:

1.  Tap the 

Logs

 icon   on the navigation bar.

The “Logs” main screen appears.

2.  Tap the 

Chart

 button. 

The “Chart” screen appears.

3.  If necessary, tap and drag the scrollbar to the right of the charts list to locate the desired chart.

4. 

Select individual runs

 by activating the checkboxes next to the items you would like to export, 

or

 tap the 

Select All

 checkbox at the top of the screen to select all available runs.

5.  Tap the 

Export Chart Data

 button to start the export of the selected charts.

The export will start now, as indicated by the “Export Chart Data” pop-up window below. It shows a 
cautioning message not to remove the USB drive and a green and gray progress bar that lets you follow the 
process. If you have not inserted a USB drive into the USB port of the centrifuge, the “Export Chart Data” 
pop-up window appears, prompting you to insert a USB drive. If necessary, insert the USB drive into the 
USB port of the centrifuge.

NOTICE 

You may abort a running export at any time by tapping the Cancel button in the “Export Chart 

Data” pop-up window. If you do so, the export is aborted, and the “Export Canceled” message appears. 
Acknowledge the message and repeat the export with an alternative selection of charts, if necessary.

NOTICE 

While the export is running, make sure you do not remove the USB drive from the USB port. If 

you do so, the export is aborted, and the “Export Error” message appears. 

NOTICE 

While the export is running, the USB drive may run out of disk space. If that happens, the export 

is aborted, and the “Export Error” message appears. Free up space on the USB drive and repeat the 
export with a new selection of charts.

When the export has been successfully completed, the “Export Complete” pop-up window appears. Tap the 

OK

 button to acknowledge the message and remove the USB drive.

On your USB drive, you will find a new file with the general filename 

UnitName_ChartData_YYYY_MM_

DD.csv

 now.

Содержание Sorvall ST Plus Series













































































































































































Отзывы:

Нет отзывов