manualshive.com logo in svg

Thermo Scientific Sorvall ST 8FR, Инструкция по эксплуатации

Поделиться
Скачать
Thermo Scientific Sorvall ST 8FR Скачать руководство пользователя страница 16

Thermo Scientific Sorvall ST 8FR Centrifuge

16

 

II. Transport and Set Up

1.  Before Setting Up

1� 

Check the centrifuge and the packaging for any shipping damage� Inform the shipping 

company and Thermo Fisher Scientific immediately if any damage is discovered�

2� 

Remove the packaging�

NOTICE 

Dispose the packaging� Do not reuse it�

3� 

Check, if the items supplied are complete (

“Items Supplied” on page 6

)�

If the items supplied are incomplete, please contact Thermo Fisher Scientific�

2.  Location

CAUTION

UV rays reduce the stability of plastics.

Do not subject the centrifuge, rotor and plastic accessories to direct 
sunlight.

The centrifuge is only to be operated indoors�

The set-up location must fulfill the following requirements:

 

ƒ

A safety zone of at least 30 cm must be maintained around the centrifuge� People and 

hazardous substances must be kept out of this safety zone while centrifuging�

Содержание Sorvall ST 8FR


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды