Thermo Scientific SOLA II, Руководство пользователя

Страница: 52 / 205

Operation
Begin Analyzing
5-2 SOLA II User Guide Thermo Fisher Scientific
Figure 5–2.
1. If the analyzer is shut down, start up the instrument by following the
appropriate set of instructions in
Chapter 4 .
2. If the system power is off, open the instrument and carrier air flows to
the analyzer, and adjust the pressures to the appropriate settings (refer to
application data that shipped with the analyzer).
3. Open sample flow to the analyzer.
4. Apply power to the instrument.
5. Analysis begins automatically when the pyrolyzer reaches operating
temperature. If you need to change the configuration, press any button,
and enter the passcode.
Follow these steps to suspend an analysis.
1. Enter the Analyzer Mode top-level menu (Figure 5–3).
2. Select Suspended
to suspend the analysis. In suspended mode, the
analyzer stops injecting, and the sample diverter valve allows only air to
run through the burner and mixing chamber.
3. To resume the analysis, go to the Analyzer Mode menu, and select Active.
Begin Analyzing
Suspending an
Analysis