Thermo Scientific SOLA II, Руководство пользователя

Страница: 15 / 205

Safety Information & Guidelines
Electrical Power
Thermo Fisher Scientific SOLA II User Guide 1-3
Caution
Ovens, internal components, and sample systems may be hot even
when power is not applied to the unit. Take appropriate precautions to
prevent injury resulting from contact with hot items.
σ
All applicable regulations and procedures must be followed for the work
performed. Before beginning any work on the system, carefully consider all
the potential hazards and ensure that appropriate measures are taken to
prevent injury to personnel and damage to equipment.
The system uses AC power at 110 Vac (an optional step-down transformer is
available for 220 Vac). The AC power is converted to DC at several voltage
levels. Appropriate precautions must be taken to prevent sparks present in the
analyzer environment that may ignite combustible materials. Precautions must
also be taken to prevent electrical shock if the analyzer or sample system
enclosures are opened.
The AC power to the system must be free from noise, surges, sags, and spikes
for proper system operation. AC power circuit breakers and wiring must be
sized properly for the required current. All wiring installations must meet
applicable electrical codes.
The fuse is located on the analyzer terminal block.
Caution
If it becomes necessary to replace the fuse, it must be replaced with
one of the same rating: Fuse, 3 A S/B (p/n TE-4510).
σ
Warning
Remove power prior to performing any work internal to the
instrument. An override is available for use in non-hazardous areas; however,
removal of components while the instrument is energized is not permitted.
σ
Electrical Power