Thermo Scientific PrintMate AS, Руководство оператора

Страница: 78 / 87

PrintMate AS A83810100 Issue 2
70
Cleaning Procedure
To ensure continuous reliable operation the following cleaning procedures should be carried out on a weekly
basis:

Use damp cloth and a 10% commercial, Hypochlorite bleach solution in water to wipe the outer covers
and output chutes (if fitted).
Never use solvents on the covers as these may discolour the plastic parts.

Use a vacuum cleaner with a non-metallic nozzle to remove any accumulated dust from the internal areas.
Cassette pre-heat area may be hot.
Note
Before carrying out any cleaning or maintenance procedures the user must have read and understood the following
statements:
If the Instrument has been used with, or has come into contact with, hazardous material,
ensure that the appropriate decontamination procedures have been followed (See World
Health Organization Laboratory Biosafety Manual)
Cleaning or decontamination methods, other than those recommended in this document,
should be checked with a Thermo Fisher Scientific agent to ensure that they will not damage
the instrument.
Always wear suitable protective coverings when carrying out cleaning using chemicals.
Do not use chemicals which may interact with the materials of manufacture - If in doubt
contact your Thermo Fisher Scientific agent.
Do not use hypochlorites in strong solution.
Do not use abrasive compounds or metal components to clean the Instrument or its
accessories.
Always clean up spills immediately.
In the event of a major spillage on or around the Instrument, immediately disconnect the
instrument from the Mains supply, and do not reconnect until the instrument has been
thoroughly dried and checked by a Thermo Fisher Service Engineer.
Potentially lethal voltages in excess of 110VAC are present within the Instrument - Do not
remove any access covers.