2
Setting Up the Instrument
Setting Utility Parameters
Thermo Scientific
Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis
11
2. Highlight the length of time you want the instrument to wait before entering standby
mode and press
Enter
.
Setting Baseline Expiration Time
If you will be performing scans on your samples, you can set a time limit for which a collected
baseline will be valid. This is particularly useful when measurements are made in a production
setting across multiple shifts or when the nature of the blank sample changes dramatically
with time.
To set the baseline expiration time
1. Highlight
Baseline Expiration (hr:min)
and press
Enter
.
2. Enter the desired time in the
Entry baseline expiration time
field and press
Enter
.
