Thermo Scientific OGS 100, Руководство по эксплуатации

Страница: 27 / 110

Installation
Installing the Stacking Feet
Thermo Scientific Heratherm 3-11
Installing the Stacking Adapter
Stack as follows when using a stacking adapter (numbers denote oven volumes in liters):
• for 60/100/180 on 180 use stacking adapter Heratherm 180L,
• for 60/100/100 on 180 use stacking adapter Heratherm 100L,
• for 60/60/100 on 180 use stacking adapter Heratherm 60L,
To prevent the top oven from slipping and dropping down, the following requirements must
be fulfilled before devices may be stacked:
• Only two units may be stacked together. When stacking devices with the same type of
enclosure, yet with a different footprint the device with the smaller footprint must be
placed on top of the one with the larger footprint at all times.
• The bottom device must be correctly levelled.
• Be sure to use the appropriate stacking adapter.
• The levelling feet on the top device must be screwed in all the way.
• The levelling feet of the top device must be aligned with and placed exactly on the stacking
pads of the stacking adapter.
• The anti-tilt anchor must be installed on the top device.
1 Stacking adapter Heratherm 60L
2 Stacking adapter Heratherm 100L
3 Stacking adapter Heratherm 180L
4 Anti-tilt anchor