Thermo Scientific OGS 100, Руководство по эксплуатации

Страница: 10 / 110

Safety Notes
Operational Safety Rules
1-2 Heratherm Thermo Scientific
Operational Safety Rules
The following rules must be heeded when working with Heratherm ovens:
• Observe the sample weight limits specified for your Heratherm oven as a whole and its
shelving in particular; see “Technical Data” on page 13-1 ).
• Do not load the bottom of the interior workspace to avoid the risk of overheating any
samples placed there.
• Arrange the samples evenly throughout the work space, making sure not to place them
too closely to the interior walls to ensure a uniform temperature distribution.
• Do not load your Heratherm oven with substances that exceed the capabilities of the
available lab apparatus and Personal Protection Equipment to provide sufficient degrees
of protection to users and third parties.
• Check the door seal once a week for proper sealing performance and possible damage.
• Do not process any samples containing hazardous chemical substances that may be
released into the ambient air through defective seals or may cause corrosion or other
defects on parts of the Heratherm oven.
Warranty
Thermo Electron LED GmbH warrants the operational safety and functions of the
Heratherm ovens only under the condition that:
• the oven is operated and serviced exclusively in accordance with its intended purpose
and as described in these operating instructions,
• the oven is not modified,
• only original spare parts and accessories that have been approved by Thermo Electron
LED GmbH are used (third-party spares without Thermo Electron LED GmbH
approval void the limited warranty),
• inspections and maintenance are performed at the specified intervals,
• an installation verification test is performed on commissioning the oven for the first time
and repeated after each inspection and repair activity.
The warranty is valid from the date of delivery of the oven to the customer.