Thermo Scientific Multidrop Combi nL Скачать руководство пользователя страница 13

Страница: 13 / 106

Introduction to the Multidrop Combi nL

Intended use

Thermo Fisher Scientific

Thermo Scientific Multidrop Combi nL User Manual

The Multidrop Combi nL is intended for professional research use by

trained personnel. It is intended for automated nanoliter to microliter

volume dispensing of reagent into a variety of microplates and strips in

96, 384 or 1536-well plate format. Use for self-testing is excluded.

The Multidrop Combi nL (Figure 1–1) can be:

Used as a standalone instrument with internal software using the

keyboard and display,

Controlled more flexibly with a PC, with FILLit™ Software, via an

RS-232 or a USB serial port, or

Used as part of an automation system.

The Multidrop Combi nL has a pressure/vacuum based dispensing

system that the instrument controls. The liquid is pushed through a

microsolenoid dispensing valve by means of compressed air into a well.

The reagent can be dispensed into rows, columns or wells.
The pressure system can also produce vacuum, which is used for the

backflush of reagents (Empty function).

Reliable low-volume dispensing can be carried out with the Multidrop

Combi nL.
With a volume range of 50 nl to 50 µl for 96, 384 and 1536-well plates

with dispensing heights from 5 to 55 mm, the Multidrop Combi nL

offers outstanding flexibility for a wide range of applications.
Multidrop Combi nL can be used, for example, in cell and bead-based

assays and to a greater extent in drug discovery screening processes for

dispensing protein solutions (BSA), detergents, dyes and different kinds

of solutions. Compounds of interest are often solubilized in DMSO

that is ready calibrated and in store in the instrument.
The viscosity of the solutions varies considerably. Viscosity describes a

fluid's internal resistance to flow and can be thought of as a measure of

fluid friction. Thus, water is "thin", having a lower viscosity, while

glycerol is "thick", having a higher viscosity. The instrument can

calibrate the valve open times and dispense with great accuracy liquids

with different viscosities. Enzyme or antibody solutions, which often

contain glycerol, can be reliably dispensed with the Multidrop Combi

nL.

Intended use

Principle of

operation

Pressure/vacuum

system

Dispensing

applications

Содержание Multidrop Combi nL











































































































Результаты поиска

Содержание Multidrop Combi nL

Отзывы:

Бренды по названию

Популярные бренды

Thermo Scientific Multidrop Combi nL, Руководство пользователя

Результаты поиска

Содержание Multidrop Combi nL

Отзывы:

Бренды по названию

Популярные бренды