Thermo Scientific ISQ, Руководство пользователя

Страница: 65 / 152

4
Creating a Method
Creating a Method for the GC
Thermo Scientific ISQ User Guide 43
Figure 31. Configuring the Tune Report Options
Creating a Method for the GC
Click the GC icon in the left pane to create a GC method.
Creating a method for the TRACE 1300 or TRACE 1310
 To create a method for the TRACE 1300 or TRACE 1310
1. Click the Oven tab to set the oven temperatures. There is always at least one temperature
and time in any GC temperature program. In the Initial row, enter the initial
temperature, which must be 4 °C above room temperature and less than the maximum
operating temperature of your GC column. If you set the initial temperature to a value
below this limit, the GC will not reach the initial temperature. If you set the temperature
above the limit, the GC column will get damaged. You can set the initial hold time to a
value between 0 and 999.99 minutes. The typical initial temperature is at least 10 °C
above the boiling point of your sample solvent and the initial time is usually long enough
for the solvent to move through the column.