Thermo Scientific Ion Torrent A45727 Скачать руководство пользователя страница 41

Страница: 41 / 163

When finished, enter a new name and short name for the copied assay in the

Assay Name field, then click Save.
The newly created assay is added to the list of assays in the Assay > Manage

Assays screen. The assay is listed as a Draft in the Status column.

In the Actions column, in the row of the assay, click Lock to enable its use in a

run plan.

Import an assay (manager/administrator)

A manager- or administrator-level user can import an assay from another Genexus

™

Integrated Sequencer if the assay has been first exported to a local drive.

In the menu bar, click (Assay)

Manage Assays.

In the Assay > Manage Assays screen, click Import Assay.

In the Import Assay dialog box, click Select file, navigate to the exported assay

ZIP folder on your drive, then select it.

Click Import.

The assay appears in the list of assays in the Assay > Manage Assays screen.

Chapter 3

Create and manage assays (manager/administrator)

Import an assay (manager/administrator)

Genexus

™

Integrated Sequencer User Guide

Содержание Ion Torrent A45727




































































































































































Результаты поиска

Содержание Ion Torrent A45727

Отзывы:

Похожие инструкции для Ion Torrent A45727

Бренды по названию

Популярные бренды

Thermo Scientific Ion Torrent A45727, Руководство пользователя

Результаты поиска

Содержание Ion Torrent A45727

Отзывы:

Похожие инструкции для Ion Torrent A45727

Бренды по названию

Популярные бренды